Fujitsu F2MC-16LX Hardware Manual page 19

16-bit microcontroller mb90330 series

Hide thumbs Also See for F2MC-16LX:

Table of Contents

Capacity of built-in ROM and ROM type

• Mask ROM:256 Kbytes, 384 Kbytes

• Flash ROM:384 Kbytes

Built-in RAM

• Mass production products:16 Kbytes, 24 Kbytes

• Flash products:24 Kbytes

• Evaluation chip: 28 Kbytes

Process: CMOS technology

Low-power consumption (standby) mode

• Sleep mode (mode by which the CPU operation clock is stopped)

• Stop mode (mode by which original oscillation is stopped)

• CPU intermittent operation mode

• LQFP-120 (FPT-120P-M05:0.4 mm pin pitch)

• LQFP-120 (FPT-120P-M21:0.5 mm pin pitch)

Operation guaranteed temperature:-40 °C to +85 °C (0 °C to +70 °C when USB is in use)

General-purpose: maximum 94 ports

General-purpose I/O (CMOS):56 ports

General-purpose I/O ports (input pull-up resistor settable): 16 ports

General-purpose I/O ports (output open drain/5 V tolerant I/O ports): 22 ports

Timer: Time base timer/watchdog timer/clock timer: One channel

16-bit I/O timer

• 16-bit free-run timer: 1 channel

• Input capture (ICU): 4 channels

• Output compare (OCU): 4 channels

8/16-bit PPG timer: 8 bits x 16 channels or 16 bits x 3 channels

16-bit reload timer: 3 channels

16 bit PWC timer: 1channel

UART:4 channels

Extended I/O serial interface: 1 channel

CHAPTER 1 OVERVIEW