Fujitsu F2MC-16LX Hardware Manual page 7

register, and the operation of the 8/10-bit A/D converter.
Chapter 20 Extended I/O serial interface
This chapter describes an overview of the extended I/O serial interface, the configuration and function
of registers, and operations of extended I/O serial interface.
Chapter 21 UART
This chapter describes the overview of the UART, the configuration/functions of the register, the
operation of the UART, the usage note of the UART, and the example of UART program.
2
Chapter 22 I C interface
This chapter gives an overview of I
2
operations of I C interface.
Chapter 23 ROM mirror function selection module
This chapter describes the functions of the ROM mirror function selection module and the
configuration/function of the register.
Chapter 24 Address match detection function
This chapter explains the address match detection function and its operation.
Chapter 25 3M-bit FLASH MEMORY
This chapter describes the functions and operation of 3M-bit flash memory, and the method for writing/
deleting data to the flash memory.
Chapter 26 Example of connecting serial writing
This chapter describes the serial on-board writing of the flash ROM (Fujitsu standard).
APPENDIX
Appendix includes detailed information on I/O map, interrupt vector, and instruction list, which are not
mentioned in this manual and information that is needed for programming.
2
C interface, the configuration and functions of registers, and
iii