Fujitsu F2MC-16LX Hardware Manual page 32

CHAPTER 1 OVERVIEW
Table 1.5-1 Pin Function (6/7)
Pin No. Pin Name
56 to 59 PA0 to PA3
IN0 to IN3
60 to 63 PA4 to PA7
OUT0 to OUT3
64 PB0
SCL1
65 PB1
SDA1
66 PB2
SCL2
67 PB3
SDA2
68 PB4
69 PB5
PPG4
70 PB6
PPG5
71 VBUS
73 DVM
74 DVP
77 HVM
78 HVP
80 HCON
36 AVcc
37 AVRH
38 AVss
87 to 89 MD2 to MD0
16
Circuit
Type
C It is General-purpose I/O port (Withstand voltage of 5 V).
Captures as trigger input for ch0 to ch3 of the input capture.
C It is General-purpose I/O port (Withstand voltage of 5 V).
Functions as the event output pins for ch0 to ch3 of the output compare.
C It is General-purpose I/O port (Withstand voltage of 5 V).
Functions as the clock I/O pin for the I
2
during I C interface operations.
C It is General-purpose I/O port (Withstand voltage of 5 V).
Functions as the data I/O pin for the I
2
during I C interface operations.
C It is General-purpose I/O port (Withstand voltage of 5 V).
Functions as the clock I/O pin for the I
2
during I C interface operations.
C It is General-purpose I/O port (Withstand voltage of 5 V).
Functions as the data I/O pin for the I
2
during I C interface operations.
C It is General-purpose I/O port (Withstand voltage of 5 V).
D It is General-purpose I/O port.
Function as ch4 output pins for the PPG timer.
D It is General-purpose I/O port.
Function as ch5 output pins for the PPG timer.
C Terminal for state detection of USB cable (Withstand voltage of 5 V).
K It is USB Function D- terminal.
K It is USB Function D + terminal.
K It is USB Mini-HOST D- terminal.
K It is USB Mini-HOST D + terminal.
E It is external pull-up resistor pin.
- It is A/D converter power supply pin.
J It is A/D converter external reference power supply pin.
- It is A/D converter power supply pin.
B It is Operation mode select input pin.
Functional description
2
C interface ch1. Set port output to Hi-Z
2
C interface ch1. Set port output to Hi-Z
2
C interface ch2. Set port output to Hi-Z
2
C interface ch2. Set port output to Hi-Z