Show Rmon - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface
Hide thumbs Also See for SCALANCE XM-400:
Table of Contents

Advertisement

12.3.1

show rmon

Description
This command shows the settings of the remote monitoring function.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:
You are in the User EXEC mode or in the Privileged EXEC mode or in the Global
Configuration mode.
The command prompt is as follows:
cli>
The parameters have the following meaning:
Parameters
statistics
stats-index
alarms
events
history
history-
index
overview
With this command, you can display several parameters with one call.
If you do not select any parameters from the parameter list, only the
is shown.
Result
The settings of the remote monitoring function are displayed.
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
or
cli#
or
or
cli#
cli(config)#
Description
Shows counts for various packet characteristics and sizes
Index number for the statistical values
Shows the threshold values and event assignments for alarms
Shows the status and the actions that are triggered
Shows the stored statistical values for earlier transmission periods
Index number for the previous statistical values
Displays an overview
Diagnostics
12.3 RMON
Range of
values
-
1 ... 65535
-
-
-
1 ... 65535
-
/
status
enabled
disabled
571

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scalance xr-500

Table of Contents