No Spanning-Tree Priority; Spanning-Tree Mst Configuration - Siemens SCALANCE XM-400 Configuration Manual

You display this setting and other information with the commands that start with
spanning tree ...
6.3.4.6

no spanning-tree priority

Description
With this command, you reset the priority of the device back to the default value.
The default value is 32768.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no spanning-tree[mst <instance-id(1-64)>]priority
The parameters have the following meaning:
Parameters
mst
instance-id
Result
The priority of the device is reset to the default value.
Further notes
You configure the setting with the
You display this setting and other information with the commands that start with
spanning tree ...
6.3.4.7

spanning-tree mst configuration

Description
With this command, you change to the MSTP configuration mode.
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
.
Description
Keyword for a Multiple Spanning Tree instance
Number of the instance
spanning-tree mst priority
.
Network structures
6.3 Spanning Tree
show
Range of values
-
1 ... 64
command.
show
197