12.1.14.2
client config
Description
With this command, you enable one of the clients that processes or forwards the messages
of the device.
The following clients are available:
●
●
●
Requirement
You are in the EVENTS configuration mode.
The command prompt is as follows:
cli(config-events)#
Syntax
Call up the command with the following parameters:
client config {syslog|trap|email|all}
The parameters have the following meaning:
Parameter
syslog
trap
email
all
Result
The function of the client selected for the transfer is enabled.
Further notes
You display the status of the events and the clients with the
You disable a client with the
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
: sends the messages to the central log server
syslog
: sends the messages as SNMP trap to a configured recipient
trap
: sends the messages as e-mail
email
Description
Enables the client that sends the messages to the log server
Enables the client that sends the SNMP traps
Enables the client that sends the e-mails
Enables all clients at once
command.
no client config
Diagnostics
12.1 Event and fault handling
command.
show events config
553