Network structures
6.4 Passive Listening
6.4
Passive Listening
6.4.1
show passive-listening
Description
This command shows whether or not passive listening is enabled.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:
show passive-listening
Result
disabled
is displayed.
230
or
cli#
is displayed if passive listening is disabled. If passive listening is enabled,
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
enabled