7.4.2.6
snmp community index
Description
With this command, you configure the details of an SNMP community.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
snmp community index <CommunityIndex> name <CommunityName>
The parameters have the following meaning:
Parameter
CommunityIndex
name
CommunityName
security
SecurityName
context
Name
-
If optional parameters are not specified when configuring a community, the following defaults
apply:
Parameter
Storage type
Result
The settings are configured.
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
security <SecurityName> [context <Name>][{volatile|nonvolatile}]
Description
Index of the community
Keyword for the name of the community
Name of the community
Keyword for the security name
Security name
Keyword for the context name
Context name
specifies whether the settings remain
following a restart
Range of values
max. 32 characters
-
max. 32 characters
-
max. 32 characters
-
max. 32 characters
•
volatile
The settings are lost after a
restart
•
nonvolatile
The settings are retained after a
restart
Default values
nonvolatile
Network protocols
7.4 SNMP
(volatile):
(non-volatile):
279