No Ports - Siemens SCALANCE XM-400 Configuration Manual

Network structures
6.1 VLAN
Result
The existing VLAN configuration is replaced. To add individual interfaces, you need to
recreate the full list.
Further notes
You display details of the function with the
You reset the settings with the
6.1.4.2

no ports

Description
With this command, you remove ports from a VLAN.
Requirement
You are in the VLAN configuration mode.
The command prompt is as follows:
cli(config-vlan-$$$)#
Syntax
Call up the command with the following parameters:
no ports
170
(
[<interface-type><0/a-b,0/c,...>]
[<interface-type><0/a-b,0/c,...>]
[port-channel<a,b,c-d>]
[all]
)
[
untagged<interface-type> <0/a-b,0/c,...>
(
[<interface-type><0/a-b,0/c,...>]
[port-channel <a,b,c-d>]
[all]
)
]
[
(
forbidden<interface-type><0/a-b,0/c,...>
[<interface-type><0/a-b,0/c,...>]
[portchannel<a,b,c-d>]
[all]
)
command.
show vlan
command.
no ports
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07