The Command - Siemens SCALANCE XM-400 Configuration Manual

General information
2.7 General CLI commands
2.7.4.2

The command "?"

Description
With this command, you call up the command list.
Syntax
Enter a question mark to obtain a list of all permitted commands in the current mode:
?
For this command, you do not need to press the enter key.
The command executes immediately after you type the character.
Both the mode-specific as well as the global commands are displayed.
Note
Incomplete command names
If you have specified an incomplete command when calling the help function, a list of all
commands that start with the term you have entered is created.
Note
Output in pages
With long lists, the results are displayed as pages. If
the display, you can move to the next page with the spacebar. If the display is in pages, you
cannot page back. You exit the page display with the
36
appears at the lower edge of
-- more --
key.
q
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07