Spanning-Tree Restricted-Role - Siemens SCALANCE XM-400 Configuration Manual

Further notes
You enable the setting with the
You can display the status of this function and other information with the following
commands:
●
●
●
6.3.5.14

spanning-tree restricted-role

Description
With this command, you prevent the port adopting the role of root port.
Requirement
You are in the Interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call the command without parameters:
spanning-tree restricted-role
As default the function is "disabled".
Result
The port is prevented from adopting the role of root port.
Further notes
You cancel the lock with the
You can display the status of this function and other information with the
detail
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
show spanning-tree detail
show spanning-tree active detail
show spanning-tree interface
command.
spanning-tree loop-guard
no spanning-tree restricted-role
Network structures
6.3 Spanning Tree
command.
command.
show spanning tree
217