Event And Fault Handling; Logging Console; No Logging Console - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

12.1 Event and fault handling

Event and fault handling

In events and faults handling, you set the events whose messages will be distributed in one

of the available ways.

You configure the monitoring of certain system events and power supply and physical

interfaces in the Events configuration mode.

With this command, you enable the logging of inputs and outputs to the console.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

Call the command without parameters:

logging console

The logging function is enabled on the console.

Further notes

You disable the setting with the

As default the function is "disabled".

With this command, you disable the logging of inputs and outputs to the console.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

no logging console

SCALANCE XM-400/XR-500 Command Line Interface

Configuration Manual, 05/2014, C79000-G8976-C252-07

Scalance xr-500