Show Ip Protocol - Siemens SCALANCE XM-400 Configuration Manual

9.2

show ip protocol

Description
This command shows the current settings of the activated routing protocols.
Note
This command is available only with layer 3.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameter assignment:
show ip protocol
Result
The current settings of the activated routing protocols are displayed.
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
or
cli#
Layer 3 functions
9.2 show ip protocol
359