Show Ip Dns Name-Server; Show Ip Dns Statistics - Siemens SCALANCE XM-400 Configuration Manual

Network protocols
7.1 IPv4 protocol
Result
The content of the DNS cache is displayed.
7.1.9

show ip dns name-server

Description
This command shows information about the DNS servers configured on the device. The
table contains the index, the address type (e.g. IPv4) and the IP address.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show ip dns name-server
Result
The table with the information about the DNS servers is displayed.
7.1.10

show ip dns statistics

Description
This command shows DNS statistics. It provides information about the type and number of
queries to the DNS server.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
238
or
cli#
or
cli#
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07