Show Mac-Address-Table Count - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface
Hide thumbs Also See for SCALANCE XM-400:
Table of Contents

Advertisement

6.1.1.6

show mac-address-table count

Description
With this command, you show the number of MAC addresses for all or a selected VLAN.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:
show mac-address-table count[vlan<vlan-id(1-4094)>]
The parameters have the following meaning:
Parameters
vlan
vlan-id
If you do not select any parameter from the parameter list, the total number of entries is
displayed for all VLANs.
Result
The number is displayed.
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
or
cli#
Description
Keyword for a VLAN
Number of the addressed VLAN
Network structures
6.1 VLAN
Values
-
1 ... 4094
143

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scalance xr-500

Table of Contents