Siemens SCALANCE XM-400 Configuration Manual page 293

cli(config)#
Syntax
Call up the command with the following parameters:
snmp view <ViewName><OIDTree>[mask<OIDMask>]{included|excluded}
The parameters have the following meaning:
Parameter
ViewName
OIDTree
mask
OIDMask
-
-
If optional parameters are not specified when configuring, the following defaults apply:
Parameter
OIDMask
View type
Storage type
Result
The SNMP view is configured.
Further notes
You delete the view with the
You display the configured view trees with the
You display the SNMP group access rights with the
You configure the SNMP group access rights with the
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
[{volatile|nonvolatile}]
Description
Name of the SNMP view
Object ID
Keyword for the OID mask
Mask that filters access to the elements of
the MIB tree
Specifies whether the filtered elements are
used or excluded
specifies whether the settings remain
following a restart:
Default value
None
included
nonvolatile
command.
no snmp view
show snmp viewtree
Range of values
max. 32 characters
Path information of the MIB tree
-
A series of " " and "
0 1
in keeping with the path information of
the MIB tree
•
included
•
excluded
(volatile):
•
volatile
The settings are lost after a restart
(non-volatile):
•
nonvolatile
The settings are retained after a
restart
command.
show snmp group access
command.
snmp access
Network protocols
7.4 SNMP
" separated by dots
command.
293