Diagnostics
12.4 Port Mirroring
12.4.2
show monitor barrier
Description
This command shows the status of the communication via the mirror port.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:
show monitor barrier[{session<session-id(1)>|all}]
The parameters have the following meaning:
Parameters
session
session-id
all
Result
The settings are displayed.
12.4.3
show monitor session
Description
This command shows the settings used for mirroring ports.
You obtain information about the ports from which incoming and/or outgoing data traffic is
mirrored and the port at which the mirrored data is output.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
582
or
cli#
Description
Keyword for a session whose settings are displayed
Number of the session
Shows the settings of all sessions
or
cli#
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
Range of values
-
1
-