Network structures
6.1 VLAN
6.1.2.4
no map protocol
Description
With this command, you delete a protocol from all protocol groups.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no map protocol
The parameters have the following meaning:
Parameter
ip
novell
netbios
appletalk
other
enet-v2
Result
The protocol is removed from all protocol groups.
Further notes
You create the protocol group with the
You can display the status of this function and other information with the
protocols-group
152
{ip | novell | netbios | appletalk | other <aa:aa>}
enet-v2
Description
Internet Protocol v4
Novell Netware protocol
Netbios via TCP/IP
Appletalk
Other protocol.
Frame structure is Ethernet II
command.
command.
map protocol
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
Range of values
HEX 08:00
HEX 81:38
HEX f0:f0
HEX 80:9b
enter the hexadecimal
protocol value.
other:
•
aa:aa
IPV6:
•
86:DD
LLDP:
•
88:CC
PTP IEEE1588:
•
88:F7
EAP (802.1X):
•
88:8E
-
show vlan