Show Mac-Address-Table Dynamic Multicast - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

The entries are displayed.

show mac-address-table dynamic multicast

This command shows the table with the dynamic multicast MAC addresses assigned by the

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

Call up the command with the following parameters:

show mac-address-table dynamic multicast[vlan<vlan-range>]

The parameters have the following meaning:

aa:bb:cc:dd:ee:ff

interface-type

interface-id

For information on names of addresses and interfaces, refer to the section "Addresses and

interface names (Page 30)".

If you do not select any parameter from the parameter list, the entries are displayed for all

available interfaces.

The entries are displayed.

SCALANCE XM-400/XR-500 Command Line Interface

Configuration Manual, 05/2014, C79000-G8976-C252-07

[address<aa:bb:cc:dd:ee:ff>]

[{interface<interface-type><interface-id>}]

Keyword for a VLAN

Number of the addressed VLAN

Keyword for a MAC address

Keyword for a an interface description

Type of interface

Slot no. and port no. of the interface

Network structures

gigabitethernet

extreme-ethernet

Enter a valid interface name

Scalance xr-500