Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
no dot1x guest-vlan
Result
The guest VLAN function is disabled for the device.
11.7.4.3
dot1x mac-auth
Description
With this command, you enable MAC authentication for the device.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
dot1x mac-auth
Result
MAC authentication is enabled for the device.
Further notes
You also still need to enable MAC authentication for every port intended to use this function.
You do this with the
You disable the function with the
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
command in the Interface configuration mode.
dot1x mac-auth
no dot1x mac-auth
Security and authentication
11.7 Port Based Network Access Control
command
529