No Spanning-Tree Mst - Siemens SCALANCE XM-400 Configuration Manual

The parameters have the following meaning:
Parameter
instance-id
cost
port-priority
disable
Note
Configure multiple properties
Each time the command is called, you can configure precisely one property.
If you want to configure more than one property, call up the command more than once.
Result
The selected setting is configured.
Further notes
You can reset the setting to the default with the
You display these settings and other information with the commands that start with
spanning tree ...
6.3.5.4

no spanning-tree mst

Description
With this command, you reset the various properties of the multiple spanning tree function to
the default value.
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
Description
Number of the addressed instance
Costs of the port for calculating the lowest cost
path.
Priority of the interface
disables the interface for multiple spanning tree
.
Range of values
1 ... 64
0 ... 200000000
Default:
200000 for physical
•
interfaces
199999 for port channels
•
0 ... 240 in steps of 16
Default: 128
-
Default:
The multiple spanning tree
function is enabled on the
interface
no spanning-tree mst
Network structures
6.3 Spanning Tree
(properties) command.
show
209