Parameter
notify
-
The keywords need to be specified.
If optional parameters are not specified when configuring a group, the following defaults
apply:
Parameter
read
write
notify
Storage type
Result
The settings are configured.
Further notes
You delete the access to an SNMP group with the
You display the configured SNMP groups with the
You display the access configurations for SNMP groups with the
command.
You display the configured SNMP tree views with the
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
Description
Changes can be set as a tag
Keyword
specifies whether the settings remain
following a restart
Range of values
•
NotifyView
•
none
(volatile):
•
volatile
The settings are lost after a restart
(non-volatile):
•
nonvolatile
The settings are retained after a restart
Default value
none
none
none
nonvolatile
command.
no snmp access
command.
show snmp group
show snmp group access
show snmp viewtree
Network protocols
7.4 SNMP
command.
277