Show Snmp Engineid; Show Snmp Filter - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

Network protocols

Call the command without parameters:

show snmp community

The details of the configured SNMP communities are displayed.

show snmp engineID

This command shows the SNMP identification number of the device.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

Call the command without parameters:

show snmp engineID

The SNMP identification number of the device is displayed.

This command shows the configured SNMP filters.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

SCALANCE XM-400/XR-500 Command Line Interface

Configuration Manual, 05/2014, C79000-G8976-C252-07

Scalance xr-500