Result
The information is displayed.
8.2.4
show ip igmp snooping switch-ip
Description
This command shows the IP address of the source for IGMP snooping.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show ip igmp snooping switch-ip
Result
The IP address is displayed.
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
or
cli#
Layer 2 management protocols
8.2 IGMP snooping
323