No Name - Siemens SCALANCE XM-400 Configuration Manual

Network structures
6.1 VLAN
Syntax
Call up the command with the following parameters:
name <vlan-name>
The parameter has the following meaning:
Parameters
vlan-name
Result
The VLAN is assigned a name.
Further notes
You delete name assignment for a VLAN with the
6.1.4.4

no name

Description
With this command, you delete the name assignment for a VLAN.
Requirement
You are in the VLAN configuration mode.
The command prompt is as follows:
cli(config-vlan-$$$)#
Syntax
Call the command without parameters:
no name
Result
The name of the VLAN is deleted.
Further notes
You assign the VLAN a name with the command
172
Description
Name that will be assigned to the VLAN
Range of values
max. 32 characters
command.
no name
.
name
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07