No Ip Access-List - Siemens SCALANCE XM-400 Configuration Manual

Security and authentication
11.4 IP access control list
Result
The access control list has been generated.
You are now in the ACL Standard Access Control List configuration mode.
The command prompt is as follows:
cli(config-std-nacl)#
Further notes
You delete the IP access control list with the
You exit the ACL Standard Access List configuration mode with the
You display the configuration of the access control list with the
11.4.1.2

no ip access-list

Description
With this command, you delete an IP access control list.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no ip access-list standard<access-list-number(1-1000)
The parameters have the following meaning:
Parameters
standard
access-list-
number
Result
The access control list is deleted.
Further notes
You generate an IP access control list with the
You display the configuration of the access control list with the
496
Description
Specifies that a standard access control list is generated
Number of the standard access control list
command.
no ip access-list
show access-lists
command.
ip access-list
show access-lists
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
command.
exit
command.
Range of
values
-
1 ... 1000
command.