Network protocols
7.4 SNMP
Syntax
Call the command without parameters:
show snmp targetparam
Result
The configured SNMP target parameters are displayed.
7.4.1.11
show snmp tcp
Description
This command shows the configuration for SNMP via TCP.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show snmp tcp
Result
The configuration for SNMP via TCP is displayed.
7.4.1.12
show snmp user
Description
This command shows the settings for the SNMP user.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
272
or
cli#
or
cli#
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07