Network structures
6.1 VLAN
Result
The classification is disabled.
Further notes
You enable the setting with the
You can display the status of this function and other information with the
info
6.1.2.7
subnet-vlan
Description
With this command, you enable the subnet-based VLAN classification on all interfaces.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
subnet-vlan
Result
The classification is enabled.
Further notes
You disable the setting with the
You can display the status of this function and other information with the
info
6.1.2.8
no subnet-vlan
Description
With this command, you disable the subnet-based VLAN classification on all interfaces.
154
command.
command.
command.
protocol-vlan
command.
no subnet-vlan
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
show vlan device
show vlan device