No Spanning-Tree Restricted-Role; Spanning-Tree Restricted-Tcn - Siemens SCALANCE XM-400 Configuration Manual

Network structures
6.3 Spanning Tree
6.3.5.15

no spanning-tree restricted-role

Description
With this command, you release the port for the role as root port.
Requirement
You are in the interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call the command without parameters:
no spanning-tree restricted-role
Result
The port is released for the role of root port.
Further notes
You prevent the port adopting the role of the root port with the
role
6.3.5.16

spanning-tree restricted-tcn

Description
With this command, you restrict the port for the Topology Change Notification (TCN)
function. The port cannot initiate any modifications to the network topology.
Requirement
You are in the interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call the command without parameters:
spanning-tree restricted-tcn
218
command.
spanning-tree restricted-
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07