No Redist-Config - Siemens SCALANCE XM-400 Configuration Manual

Syntax
Call up the command with the following parameters:
redist-config <Network> <Mask>
[metric-value <metric (1 - 16777215)>]
[metrictype {
asExttype1 | asExttype2
}]
The parameters have the following meaning:
Parameter
Network
Mask
metric-value
metric
metrictype
asExttype1
asExttype2
Result
The information for the route is specified.
Further notes
You remove the information with the
You distribute the routes with the
9.3.13.20

no redist-config

Description
With this command, you delete the information for the new external routes.
Note
This command is available only with layer 3.
Requirement
You are in the OSPF Router configuration mode.
The command prompt is as follows:
cli(config-ospf)#
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
Description
Target address of the route.
Subnet mask of this route
Keyword for the metric of the route
Metric
Keyword for the connection costs
External and internal costs
External costs
no default-information originate always
restribute
Range of values / note
specify the IP address.
specify the subnet mask.
-
1 - 16777215
--
--
--
command.
Layer 3 functions
9.3 OSPFv2
command.
391