No Gvrp - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

Layer 2 management protocols

no gvrp

With this command, you enable or disable the GVRP function for all or for individual

interfaces on the device.

You are in the Global Configuration mode

You are in the Interface Configuration mode

The command prompt is as follows:

cli(config)#

cli (config-if-$$$) #

Call the command without parameters:

In the Global Configuration mode: The GVRP function is disabled on the device.

In the Interface Configuration mode: The GVRP function is disabled for this interface.

Further notes

If you want to enable the function for a specific interface on the device, use the

You can display the status of this function and other information with the

SCALANCE XM-400/XR-500 Command Line Interface

Configuration Manual, 05/2014, C79000-G8976-C252-07

show vlan device

Scalance xr-500