Tftp Load - Siemens SCALANCE XM-400 Configuration Manual

Configuration
3.2 Load and Save
3.2.6.3

tftp load

Firmware
The firmware is signed and encrypted. This ensures that only firmware created by Siemens
can be downloaded to the device.
Description
With this command, you load a file from a tftp server into the file system of the device. The
tftp protocol is used for the transfer. You can also display a list of available files.
Requirement
● The name of the file is specified
You are in the LOADSAVE configuration mode.
The command prompt is as follows:
cli(config-loadsave)#
Syntax
Call up the command with the following parameters:
tftp load{showfiles|filetype<filetype>}
The parameters have the following meaning:
Parameter
showfiles
filetype
filetype
Result
The file types are displayed or the file is downloaded to the device.
Further notes
You configure the name of the file with the
86
Description
Shows the available files
Shows that the file type follows that will be loaded
Name of the file type
command.
tftp filename
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
Values
-
-
max. 100 characters