5.5.17
RMON
5.5.17.1
Statistics
Statistics
On this page you can specify the ports for which RMON statistics are displayed.
The RMON statistics are shown on the page "Information > Ethernet Statistics" in "Packet
Size", "Packet Type" and "Packet Error" tabs.
Settings
● RMON
If you select this check box, Remote Monitoring (RMON) allows diagnostics data to be
collected on the device, prepared and read out using SNMP by a network management
station that also supports RMON. This diagnostic data, for example port-related load
trends, allow problems in the network to be detected early and eliminated.
Note
If you disable RMON, these statistics are not deleted but retain their last status.
● Port
Select the ports for which statistics will be displayed.
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04
Configuring with Web Based Management
5.5 The "Layer 2" menu
235