Ip Igmp Snooping Clear Counters - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

Layer 2 management protocols

8.2 IGMP snooping

IGMP snooping is disabled for all VLANs.

Further notes

You enable IGMP snooping with the

ip igmp snooping clear counters

With this command, you delete the counters for all or a selected VLAN.

You are in the Global configuration mode.

The command prompt is as follows:

cli(config)#

Call up the command with the following parameters:

ip igmp snooping clear counters [Vlan<vlan id>]

The parameters have the following meaning:

If you do not select a VLAN, the counters of all VLANs will be deleted.

The counters are deleted.

ip igmp vlan-snooping

Shows that the number of a VLAN follows

Number of the addressed VLAN

SCALANCE XM-400/XR-500 Command Line Interface

Configuration Manual, 05/2014, C79000-G8976-C252-07

Range of values

Scalance xr-500