Syntax
Call the command without parameters:
no logging console
Result
The logging function is disabled on the console.
Further notes
You enable the setting with the
As default the function is "disabled".
12.1.3
show events config
Description
This command shows the current configuration for forwarding the messages of the various
event types.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show events config
Result
The current configuration of the events display is displayed.
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
or
cli#
command.
logging console
Diagnostics
12.1 Event and fault handling
543