Network structures
6.4 Passive Listening
6.4.3
no passive-listening
Description
This command disables passive listening.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
no passive-listening
Result
The passive listening function is disabled.
Further notes
You enable passive listening with the
You display the status of passive listening with the
232
command.
passive-listening
show passive-listening
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
command.