Commands In The Interface Configuration Mode - Siemens SCALANCE XM-400 Configuration Manual

Configuration
3.1 System
The parameters have the following meaning:
Parameters
user
admin
passwd
Note
Length of the password
The password must be at least 6 characters long.
Result
The password is changed.
Note
Changing the password in Trial mode
Even if you change the password in Trial mode, this change is saved immediately.
3.1.11

Commands in the interface configuration mode

This section describes commands that you can call up in the interface configuration mode.
Depending on the Interface selected, various command sets are available.
In the Global configuration mode, enter the
Commands relating to other topics that can be called in the interface configuration mode can
be found in the relevant sections.
● If you exit the Interface configuration mode with the
Global configuration mode.
● If you exit the Interface configuration mode with the
Privileged EXEC mode.
66
Description
the password for the user is changed
the password for the administrator is changed
Value for the password
command to change to this mode.
interface
command, you return to the
exit
command, you return to the
end
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07