Network structures
6.2 Link aggregation
Result
The Etherchannel is configured.
6.2.5.2
no channel-group
Description
With this command, you remove the interface from an Etherchannel.
Requirement
You are in the interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call the command without parameters:
no channel-group
Result
The interface is deleted from the Etherchannel.
182
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07