Service Dhcp-Relay; No Service Dhcp-Relay - Siemens SCALANCE XM-400 Configuration Manual

7.3.3.6

service dhcp-relay

Description
With this command, you enable the DHCP relay agent on the device. The DHCP relay agent
forwards the DHCP query to DHCP servers located in a different subnet.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameter assignment:
service dhcp-relay
Result
The DHCP Relay Agent is activated.
Further notes
You disable the DHCP Relay Agent with the
You create the IP addresses of the DHCP server with the
You can display the status of this function and other information with the
information
7.3.3.7

no service dhcp-relay

Description
This command disables the DHCP relay agent.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
command.
no service dhcp-relay
ip dhcp server
Network protocols
7.3 DHCP Relay
command.
command.
show ip dhcp relay
263