No Ip Http - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

Network protocols

7.6 HTTP server

no ip http

With this command, you disable HTTP on the device.

You are in the Global configuration mode.

The command prompt is as follows:

cli(config)#

Call the command without parameters:

As default the function is "enabled".

HTTP is disabled on the device.

Further notes

You can display the setting of this function and other information with the

server status

You enable HTTP with the

SCALANCE XM-400/XR-500 Command Line Interface

Configuration Manual, 05/2014, C79000-G8976-C252-07

show ip http

Scalance xr-500