Network structures
6.3 Spanning Tree
6.3.6.3
name
Description
With this command, you delete the name for the MST region.
Requirement
You are in the MSTP configuration mode.
The command prompt is as follows:
cli(config-mst)#
Syntax
Call up the command with the following parameters:
name <region-name>
The parameter has the following meaning:
Parameter
region-name
The default value of the name is the MAC address of the device.
Result
The name is configured.
Further notes
You delete the name of the MST region with the
You display this setting and other information with the
configuration
226
Description
Name of the MST region
command.
command.
no name
show spanning tree mst
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
Range of values
-max. 32 characters