Show Spanning-Tree Mst - Siemens SCALANCE XM-400 Configuration Manual

Network structures
6.3 Spanning Tree
Further notes
You can show further settings for special aspects of the Spanning Tree Protocol with the
following commands:
●
show spanning-tree active
●
show spanning-tree bridge
●
show spanning-tree detail
●
show spanning-tree interface
●
show spanning-tree root
●

show spanning-tree mst

6.3.1.2 show spanning-tree mst
Description
This command shows various settings of the spanning tree configuration specific to a
Common Internal Spanning Tree (CIST) instance or a selected instance of the Multiple
Spanning Tree Protocol.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with one of the following parameter assignments:
show spanning-tree mst[<instance-id(1-64)>][detail]
The parameters have the following meaning:
Parameters
instance-id
detail
Result
The settings are displayed.
184
or
cli#
Description
Number of the instance or range of instances whose
settings are displayed
Shows detailed information about the selected interface
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
Range of values
1 ... 64
-