Speed; Switchport - Siemens SCALANCE XM-400 Configuration Manual

Configuration
3.1 System
3.1.11.11

speed

Description
With this command, you configure the transmission speed of an interface.
Note
Availability of this function
The transmission speed can only be configured for electrical data transfer.
On optical connections, the transmission speed is fixed.
Requirement
You are in the Interface Configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call up the command with the following parameters:
speed {10|100|1000}
The parameters have the following meaning:
Parameters
10
100
1000
Result
The transmission speed of the interface is configured.
3.1.11.12

switchport

Description
With this command, you configure the interface as a switch port.
Requirement
● The Interface is shut down.
74
Description
Transmission speed 10 Mbps
Transmission speed 100 Mbps
Transmission speed 1000 Mbps
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07