8.4.1
clear hrp counters
Description
With this command, you reset the HRP counters.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameters:
clear hrp counters
Result
The counters are reset.
8.4.2
clear standby counter
Description
With this command, you reset the counters of the standby function.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameters:
clear standby counter
Result
The counter is reset.
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
Layer 2 management protocols
8.4 Ring redundancy and standby connection
333