No Poe Type; Poe Prio - Siemens SCALANCE XM-400 Configuration Manual

Configuration
3.5 PoE
The parameters have the following meaning:
Parameters
string
Result
The description of the connected device has been specified.
3.5.4.4

no poe type

Description
With this command, you delete the description for a connected device.
Requirement
You are in the Interface Configuration mode of a PoE interface.
The command prompt is as follows:
cli(config-if-Gi$-$)#
The placeholders $-$ stand for the numbering of the interface.
Syntax
Call the command without parameters:
no poe type
Result
The description of the corresponding device is deleted.
3.5.4.5

poe prio

Description
With this command, you specify the priority of the power supply for an interface.
Requirement
You are in the Interface Configuration mode of a PoE interface.
The command prompt is as follows:
cli(config-if-Gi$-$)#
100
Description
Description of a connected device
Range of values
max. 255 characters
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07