Table 2 shows detailed information about the individual ports:
● Port
The port number. With modular devices, the slot number and port number are displayed
separated by a dot.
PTP is not supported on SFP+ ports.
● Setting
The port status. The following entries are possible:
– disabled
– enabled
● Faulty Flag
The error status relating to PTP.
– true
– false
● Transport mechanism
Choose how this port will handle PTP message data traffic. You can make different settings
for the ports of a device, however, the relevant communications partner must support the
selected transport mechanism. The following settings are possible:
– Ethernet
– UDP IPv4
5.5.20
RMON
5.5.20.1
Statistics
Statistics
On this page you can specify the ports for which RMON statistics are displayed.
The RMON statistics are shown on the page "Information > Ethernet Statistics" in "Packet
Size", "Frame Type" and "Packet Error" tabs.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
The port is not involved in PTP.
The port processes PTP messages.
An error occurred.
No error has occurred on this port.
Configuring with Web Based Management
5.5 The "Layer 2" menu
335