System Location - Siemens SCALANCE XM-400 Configuration Manual

Configuration
3.1 System
system contact <string>
The parameter has the following meaning:
Parameter
s
string
Result
The contact information is created in the system.
3.1.10.9

system location

Description
With this command, you enter the location information for the system.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
system location <string>
The parameter has the following meaning:
Parameter
s
string
Result
The location information is created in the system.
64
Description
Input box for contact information
Description
Input box for the location information
Note
max. 255 characters
Note
max. 255 characters
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07