No Snmp View - Siemens SCALANCE XM-400 Configuration Manual

Network protocols
7.4 SNMP
7.4.2.21

no snmp view

Description
With this command, you delete an SNMP view.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no snmp view <ViewName><OIDTree>
The parameters have the following meaning:
Parameters
ViewName
OIDTree
Result
The SNMP view is deleted.
Further notes
You configure a view with the
294
Description
Name of the view
Object ID
command.
snmp view
Configuration Manual, 05/2014, C79000-G8976-C252-07
Range of values
max. 32 characters
Path information of the MIB tree
SCALANCE XM-400/XR-500 Command Line Interface