Show Versions; Clear Counters - Siemens SCALANCE XM-400 Configuration Manual

For information on names of addresses and interfaces, refer to the section "Addresses and
interface names (Page 30)".
If no parameters are specified, the settings for all ports are displayed.
Result
The multicast blocking settings for ports are displayed.
3.1.1.14

show versions

Description
This command shows the version information of the entire system.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show versions
Result
The version information of the entire system is displayed.
3.1.2

clear counters

Description
With this command, you reset the counters of an interface.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
or
cli#
Configuration
3.1 System
51