Show Vlan; Show Vlan Device Info - Siemens SCALANCE XM-400 Configuration Manual

6.1.1.8

show vlan

Description
This command shows the specific information for all or a selected VLAN.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:
show vlan[brief|id<vlan-range>|summary]
The parameters have the following meaning:
Parameters
brief
id
vlan-range
summary
If you do not select any parameter from the parameter list, the entries of all available
interfaces are displayed.
Result
The information is displayed.
6.1.1.9

show vlan device info

Description
This command shows all the global information that is valid for all VLANs.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
SCALANCE XM-400/XR-500 Command Line Interface
Configuration Manual, 05/2014, C79000-G8976-C252-07
or
cli#
Description
Shows brief information about all VLANs
Keyword for a VLAN or VLAN range
Number of the addressed VLAN or VLAN range
Shows a summary of the VLANs
or
cli#
Network structures
6.1 VLAN
Values
-
-
1 ... 4094
145